About SMB Series
SMB connectors are semi – precision, subminiature devices that provide repeatable electrical performance to 4 GHz. The SMB family of connectors provide a means of quick-connect and disconnect through a snap-on type coupling.
Its smaller physical size and snap-on coupling make the SMB an ideal general purpose connector where packaging density, ease of mating / unmating and economy are prerequisites. Crimp, clamp and receptacle types are available in right angle , printed circuit board and straight body styles.
Typical applications for SMB connectors are telecommunications, test equipment, instrumentation and GPS .
- Test and Measurement
- Process Controls
- PC / LAN
- Base Stations
- Microwave Components
- Raido Boards
- Video Systems
Impedance：50Ω / 75Ω
Frequency Range：0 to 4 GHz
Voltage Rating：≥250 V rms (depending on cable)
Insulation Resistance：≥1 GΩ
Dielectric Withstanding Voltage：750 V rms
Contact Resistance：Center Contact ≤5 mΩ、Outer Contact ≤2.5 mΩ
VSWR：≤1.3 (Straight)、≤1.45 (Right Angle)
- Low cost combined with high quality.
- Broadband performance with low reflection DC to 4 GHz.
- Quick connect/disconnect snap on mating.
- 50 and 75 ohm impedance.
- Various plating options.
- Interface according to IEC 169-10, MIL-STD-348B
Mating： Snap-on Coupling
Connector Durability： ≥500 Cycles (for beryllium copper female contact only)
Engagement Force：≤14.2 lbs
Disengagement Force：1.8 lbs~14.2 lbs
Cable Retention Force：≥ 7.3 lbs (for RG178)、≥ 12.1 lbs (for RG316)
Temperature Range：-65° C to 165° C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. B
Thermal Shock：MIL-STD-202, Method 107, Cond. B
Mechanical：MIL-STD-202, Method 213, Cond. B
Vibration：MIL-STD-202, Method 204, Cond. D