About UHF Series
UHF coaxial connectors were one of the first RF connector series to be developed.
They are a general purpose, non-constant impedance connector which operating from DC to 300 MHz. The 5/8″-24 thread coupling and clamp, crimp, twist-on and solder termination provide the UHF with the flexibility that have kept it one of the most popular coaxial connectors over the years.
Among the many application of this low cost, low frequency device are antennas connections for CB radios, public address systems, audio, video, mobile radio and test equipment.
- CB Radios
- Public Address Systems
Frequency Range：0 to 300 GHz
Voltage Rating：≥≥750 V rms (depending on cable)
Insulation Resistance：≥5 GΩ
Dielectric Withstanding Voltage：2000 V rms
Contact Resistance：Center Contact ≤5 mΩ、Outer Contact ≤5 mΩ
- With the use of optional reducers, UHF connectors are designed to accommodate a wide range of popular coaxial cables.
- Available in crimp & twist-on terminations to provide for low cost installation.
Mating： 5 / 8-24UNEF Screw-on Coupling
Connector Durability： ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque：≥ 12.1 lbs (for RG316)、≥ 28.7 lbs (for RG58)、≥ 94.5 lbs (for RG213)
Temperature Range：-25° C to 70° C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. B
Thermal Shock：MIL-STD-202, Method 107, Cond. B
Mechanical：MIL-STD-202, Method 213, Cond. G
Vibration：MIL-STD-202, Method 204, Cond. B