B220

Description

BNC B/H-O Jack, Crimp Type (IP67)
Cable: RG8/X, RG58/U, RG174/U, RG316/U and more….

 Applications 

  • Computers/LANs
  • Instrumentation
  • Test and Measurement
  • Medical Equipment
  • Broadcast (75 ohm)
 Features 

  • BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
  • Interface according to IEC 169-8, MIL-C-39012 BNC, MIL-STD-348B
 Special Notice  

• The specification is listed below for information.  All dimensions are fully complied with Military requirements.
  S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt
  Spray test at the moment.
• For electrical and mechanical test, we can cover most of it in-house.  Please refer to our Profile, Product Range,
  QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

 

 Electrical 

Impedance

50Ω / 75Ω

Frequency Range

0 to 4 GHz / 0 to 1 GHz

VSWR

≤1.3 (straight connector)

≤1.35 (right angle connector)

RF Leakage

≥55 dB

Dielectric Withstanding Voltage

1500 V rms

Voltage Rating

≥500 V rms (depending on cable)

Inner Contact Resistance

≤1.5 mΩ

Outer Contact Resistance

≤1 mΩ

Insulation Resistance

≥5 GΩ

 

 Mechanical 

Mating

Bayonet Coupling

Connector Durability

≥500 Cycles (for beryllium copper female contact only)

Recommended Mating Torque

0.6 lbs ~ 2.5 lbs

Coupling Nut Retention Force

≥101.2 lbs

Cable Retention Force

≥ 12.1 lbs (for RG316)

≥ 28.7 lbs (for RG58)

≥ 38.3 lbs (for RG59)

 

 Environmental 

Temperature Range

-65° C to 165° C

Corrosion (Salt Spray)

MIL-STD-202, Method 101, Cond. B

Vibration

MIL-STD-202, Method 204, Cond. B

Thermal Shock

MIL-STD-202, Method 107, Cond. B

Mechanical Shock

MIL-STD-202, Method 213, Cond. G

 

 Material 

Parts Name

Material

Plating

Body

Brass

Gold or Nickel

Inner Contact

Male: Brass Female: Beryllium Copper, Phosphor Bronze, Brass

Gold or Nickel

Insulator

PTFE or Delrin

None

Gasket

Silicone Rubber or Rubber

None

Crimp Ferrule

Annealed Copper

Same as Body

Note: Other Material/Finish is Available on Request.