F215

Description

F B/H Jack, Solder Type for 0.086″ Cable 75Ω

 Features 

• Interface according to IEC 169-24

 Special Notice  

• The specification is listed below for information.  All dimensions are fully complied with Military requirements.
  S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt
  Spray test at the moment.
• For electrical and mechanical test, we can cover most of it in-house.  Please refer to our Profile, Product Range,
  QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

 

 Electrical 

Impedance

75Ω

Frequency Range

0 to 1 GHz

VSWR

≤1.2

RF Leakage

≥100 dB

Dielectric Withstanding Voltage

1500 V rms

Voltage Rating

≥500 V rms (depending on cable)

Inner Contact Resistance

≤10 mΩ

Outer Contact Resistance

≤1 mΩ

Insulation Resistance

≥5 GΩ

 

 Mechanical 

Mating

 3/8-32 UNEF Screw-on

Connector Durability

≥500 Cycles (for beryllium copper female contact only)

Recommended Mating Torque

0.38 lbs ~ 0.51 lbs

Coupling Nut Retention Force

1.5 lbs

Cable Retention Force

≥20 lbs

 

 Environmental 

Temperature Range

-40° C to 60° C

Corrosion (Salt Spray)

IEC61169-1,Sub clause9.4.6

Vibration

IEC61169-1,Sub clause9.3.3

Thermal Shock

IEC61169-1,Sub clause9.4.4

Mechanical Shock

IEC61169-1,Sub clause9.3.14

 

 Material 

Parts Name

Material

Plating

Body

Brass

Nickel

Inner Contact

Male: Brass Female:Brass, Beryllium Copper or Phosphor Bronze

Tin or Gold

Ferrule
Brass
Nickel

Insulator

Delrin, Polypropylene, PTFE

Nut

Silicone Rubber, Rubber

Nickel

Washer

Annealed Copper

Nickel

Note: Other Material/Finish is Available on Request.