MX236 (12GHz)

Description

MCX S/T Jack, Edge Mount Type
Cable: N/A

 Applications 

•Telecommunications
•Instrumentation
•Wireless
•Process Controls
•PC/LAN

 

 Features 

•Low cost combined with high quality.
•Broadband performance with low reflecttion DC to 12 GHz.
•Quick connect/disconnect snap-on mating.
•75 ohm impedance.
•Interface according to IEC 169-36, CECC 22220

 

 Special Notice  

• The specification is listed below for information.  All dimensions are fully complied with Military requirements.
  S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt
  Spray test at the moment.
• For electrical and mechanical test, we can cover most of it in-house.  Please refer to our Profile, Product Range,
  QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

 

 Electrical 

Impedance

75Ω

Frequency Range

0 to 12 GHz

VSWR

≤1.2

RF Leakage

≥60 dB (flexible cable)

≥70 dB (semi- rigid cable)

Dielectric Withstanding Voltage

750 V rms

Voltage Rating

≥335 V rms (depending on cable)

Inner Contact Resistance

≤5 mΩ

Outer Contact Resistance

≤2.5 mΩ

Insulation Resistance

≥1 GΩ

 

 Mechanical 

Mating

Snap-on Coupling

Connector Durability

≥500 Cycles (for beryllium copper female contact only)

Engagement Force

≤3.4 lbs

Disengagement Force

1.4 lbs ~ 3.4 lbs

Cable Retention Force

≥7.3 lbs (for RG178)

≥12.1 lbs (for RG316)

 

 Environmental 

Temperature Range

-55° C to 155° C

Corrosion (Salt Spray)

MIL-STD-202, Method 101, Cond. B

Vibration

MIL-STD-202, Method 204, Cond. B

Thermal Shock

MIL-STD-202, Method 107, Cond. B

Mechanical Shock

MIL-STD-202, Method 213, Cond. F

 

 Material 

Parts Name

Material

Plating

Body

Brass

Gold

Outer Contact

Beryllium Copper

Gold

Inner Contact

Male : Brass

Female :Phosphor Bronze

Beryllium Copper

Gold

Insulator

PTFE

None

Gasket

Silicone Rubber

None

Crimp Ferrule

Annealed Copper

Same as Body

Note: Other Material/Finish is Available on Request.