Search

SC106

Description

SMC S/T Plug, Single Crimp Type for RG174 and more….

Applications

• Antennas
• Telecommunication
• Instrumentation
• PC – LAN

Features

• Cable Connectors (straight and right angle) for flexible and semi-rigid cables with diameters to 3.1 mm
• Frequency range up to 10 GHz
• Screw-on coupling mating.
• 50 and 75 ohm impedance.
• Various plating options.
• Interface according to IEC 169-9, MIL-STD-348B

Special Notice

• The specification is listed below for information. All dimensions are fully complied with Military requirements.

S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt

Spray test at the moment.

• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,

QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

Electrical

Impedance	50Ω / 75Ω
Frequency Range	0 to 10 GHz
VSWR	≤1.3 (staight connector) ≤ 1.45 (right angle connector)
RF Leakage	≥90 dB
Dielectric Withstanding Voltage	750 V rms
Voltage Rating	250 V rms (depending on cable)
Inner Contact Resistance	≤5 mΩ
Outer Contact Resistance	≤2.5 mΩ
Insulation Resistance	≥1 GΩ

Mechanical

Mating	Screw-on Coupling
Connector Durability	≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque	2.2 lbs ~ 3.1 lbs(max. 6.2Lbs)
Coupling Nut Retention Force	≥33.72 lbs
Cable Retention Force	≥ 7.3 lbs (for RG178) ≥ 12.1 lbs (for RG316)

Environmental

Temperature Range	-65° C to 165° C
Corrosion (Salt Spray)	MIL-STD-202, Method 101, Cond. B
Vibration	MIL-STD-202, Method 204, Cond. D
Thermal Shock	MIL-STD-202, Method 107, Cond. B
Mechanical Shock	MIL-STD-202, Method 213, Cond. C

Material

Parts Name	Material	Plating
Body	Brass	Nickel or Gold
Inner Contact	Male: Brass Female:Brass, Beryllium Copper or Phosphor Bronze	Gold
Insulator	PTFE	None
Crimp Ferrule	Annealed Copper	Same as Body

Note: Other Material/Finish is Available on Request.