T2A1

Description

TNC B/H-O Jack,Front Mount Solder Type (IP67)
Cable: N/A

 Applications 

  • Cellular Mobile Phones
  • Test and Measurement
  • Instrumentation
  • Aircraft and Missile
  • Radar
  • Computer Networks/LANs
  • Base Stations
  • Microwave Components (Filters, Diplexors)
 Features 

  • Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
  • Accommodates a wide range of popular coaxial cables.
  • Screw-on coupling mating.
  • Available in crimp terminations to provide for low cost installation.
  • Interface according to IEC 169-17, MIL-STD-348B
 Special Notice  

• The specification is listed below for information.  All dimensions are fully complied with Military requirements.
  S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt
  Spray test at the moment.
• For electrical and mechanical test, we can cover most of it in-house.  Please refer to our Profile, Product Range,
  QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

 

 Electrical 

Impedance

50Ω / 75Ω

Frequency Range

0 to 11 GHz / 0 to 1 GHz

VSWR

≤1.3 (staraight connector)
≤ 1.35 (right angle connector)

RF Leakage

≥60 dB

Dielectric Withstanding Voltage

1500 V rms

Voltage Rating

≥500 V rms (depending on cable)

Inner Contact Resistance

≤1.5 mΩ

Outer Contact Resistance

≤1 mΩ

Insulation Resistance

≥5 GΩ

 

 Mechanical 

Mating

7 / 16-28UNEF Screw-on Coupling

Connector Durability

≥500 Cycles (for beryllium copper female contact only)

Recommended Mating Torque

4.1 lbs ~ 6.1 lbs

Coupling Nut Retention Force

≥101.2 lbs

Cable Retention Force

≥ 12.1 lbs (for RG316)
≥ 28.7 lbs (for RG58)
≥ 38.3 lbs (for RG59)

 

 Environmental 

Temperature Range

-65° C to 165° C

Corrosion (Salt Spray)

MIL-STD-202, Method 101, Cond. B

Vibration

MIL-STD-202, Method 204, Cond. B

Thermal Shock

MIL-STD-202, Method 107, Cond. B

Mechanical Shock

MIL-STD-202, Method 213, Cond. G

 

 Material 

Parts Name

Material

Plating

Body

Brass

Nickel or Gold

Inner Contact

Male: Brass
Female:Brass,Phosphor Bronze or Beryllium Copper

Nickel or Gold

Insulator

PTFE or Delrin

None

Gasket

Silicone Rubber, Rubber

None

Crimp Ferrule

Annealed Copper

Same as Body

Note: Other Material/Finish is Available on Request.